Network Security

Hello,I am performing a software update on all of our CSA server agents from v6.0.0.220 to v6.0.1.106.  I finished about 450 servers but there are 140 remaining, and there are errors coming into the local Debug logs on the hosts.   I want to know if ...

I would like to store the capture I am running in the ASA on the DISK1.  Is there a way to configure that?

When I enter https://ipaddress/admin I get the error "cannot display webpage".I'm connected directly to it and my browser allows java and security connectivity. To simplify trouble shooting, how can I reset the config to factory defaults?Thanks in ad...

About a week ago our ASA 5520s bounced for some unknown reason. Since then the ASA has been advertising it's defined internalroutes back into the network. The result is that the routing tables inside the LAN now have each network advertized twice. Th...

I once read somewhere in the old Cisco SAFE that it is better to design a DMZ with a PIX/ASA on the outside and then on the inside of the DMZ address space, vs. simply using an interface on one PIX/ ASA as the DMZ, but for the life of me cannot remem...

Hi,I installed Cisco IPS Manager and it can see the AIP-SSM ips. But I do not see any real time logs and cannot create any report. What can cause this problem ? Thanks

Hi,I'm looking form confirmation on whether or not you can use a non-websense or secure computing Proxy server with the url-filter option on FWSM/ASA code.  The documentation specifically states those vendors, but I have seen a few posts referencing ...

Hi All,     I'm handling a NAC (CAS and CAM ver 4.5) to be implemented to a network on production.  The network has two working AD servers, one acting as back-up.  We want to configure the NAC to be able to run ADSSO even if the active AD fails, so w...

Hi,can i configure different port profiles on different interfaces on the same switch ?if i can, does it mean that each port will have dedicated Auth vlan\Access vlan ?for example:Switch-floorAFa0/0 (port profile 1) : Auth vlan: 10, Access vlan: 110F...

I am trying to have internal users behind an ASA use a VOIP application. The vendor mentioned to me that their application needs SIP to extend UDP ports 5060 to 5063. Below is what I did.object-group service Five9_SIP udp description Five9 UDP Ports ...

Hi,Does anyone know if it is possible to trigger a failover in case a certain IP is unreachable? I know you can do that based on interface state but I would need to do that based on a gateway reachability.Regards,Christophe

Hi,Need help in configuring the ASA Firewall. We have a ASA Firewall in which one interface is WAN link, one is production link and the other is the connectivity to corporate location.My production servers will be sitting behind the production interf...