Hi i have setup a port foward for 4000 to 172.16.X.X but apparently the firewall is blocking it. I have allowed all traffic on all ports on all wan ports to all ip address and yet nothing. Please tell me whats the problem. Oh i use the rv016
Hi i have setup a port foward for 4000 to 172.16.X.X but apparently the firewall is blocking it. I have allowed all traffic on all ports on all wan ports to all ip address and yet nothing. Please tell me whats the problem. Oh i use the rv016
HI,My network design is explained and my requirement also briefed below.Can anyone help me?1. Service Provider's ADSL line is terminated at the service providers ADSL router.2.ADSL router ethernet interface is connected to a Nortel VPN router.3.Now t...
Hello Pro,I plan to upgrade two PIX525(Active/FO mode) 6.3 to 8.0 The current flash:16M,memory:256M.I'd like to know the followings:1. Do I need to upgrade flash and memory card;2. How do I get ur license and fo license3. May I upgrade from 6.3 to 8....
I have a very simple config. I'm trying to forward custom RDP ports. The default 3389 port is forwarding fine and I'm able to get into the 10.0.0.5I cannot, however, get to 10.0.0.102The machine is up (I can RDP into the x.5 server, and from there ...
Dear Concerns,Error occurring while trying to configuring new AIP SSM-10 module with new ASA 5520. Following error shown during start of session"Authentication token manipulation errorRemote card closed command session...press any key to continue.......
Appart from IP address preservation, is there any benefit to making a DMZ private as apposed to public?
I already have a signed certificate from comodo, with its private key in pem format. tried to import it in NAM but get error "DER length more than 4 bytes". Converted it to DER format and same error. Tried with and without the private key but seems t...
If an ASA is in transparent mode can you still use access-lists? i.e. host A resides of interface 1 and has an IP of 1.1.1.1/24 and another host resides of interface 2 and has the IP 1.1.1.2/24 Can you restrict traffic to be permitted from 1.1.1.1 t...
what 5505 ASA code supports three or more interface VLANs?the 7.2(4) code supports only two.thanks, Kevin
Hi All!I have some problem.I have been tring to configure VPN 3000 series concentrator to use Lan-to-Lan connections with cerificates.I got the root CA cert and I installed it successfully on the device. And we have our certificate in .p12 file with ...
Dear all,we have problem with an ASA550-BUN-K9."â¦â¦â¦â¦â¦âcustomer said that the fans speed up every 20 seconds for around 3 secondsââ¦â¦â¦â¦.. With processor speed at just 5%, so there is no case of overload here. The problem will like...
Hi, I need to generate an snmp trap in case of failover events. I don't need to send a syslog message through snmp, but I need a true snmp trap message.How to ?thankx
What support does the ASA provide for the ftp auth command? Is it possible to write an access list to permit some users to bypass ftps encryption while others are forced to use encryption? I would like my server to enforce ftp with ssl/tls. Howeve...
Can anyone let me know if this requirement is possible with Cisco PIX?I would like to redirect HTTP requests from hosts in INSIDE to a proxy server in DMZ so as to restrict the users to use proxy for Internet access.RegardsSubbu
If you have an ASA firewall with a 10 user license, I presume that this means that only 10 inside users can connect through the firewall from the inside. If so does this restriction apply if the firewall is operating in transparent mode?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 02:14 AM | ||
04-22-2024 06:41 AM | ||
04-21-2024 09:36 PM | ||
04-17-2024 12:36 PM | ||
04-17-2024 07:38 AM |
User | Count |
---|---|
10 | |
6 | |
4 | |
3 | |
3 |