Suppose I forget or loose the enable password, is there any way to recover or change it instead of loading the factory default configuration? Thanks in advance!
Suppose I forget or loose the enable password, is there any way to recover or change it instead of loading the factory default configuration? Thanks in advance!
I have an ASA5510 which I have setup with subinterfaces on e0/0. I have had one subinterface working for sometime with PAT but I have recently added a new subinterface. I have set both of them to the same security level and I have enabled both same...
Hiour customer has a switch 6500 with 2 FWSM modules .i need to ask about the following :-can i configure the two modules for failover although the two modules in the same chassis or not ???????- Is the FWSM support VPN or not???regardsmohamed
Hi,We use more and more RDP to foreign computers and I know that certain firewalls can make a change to connections using RDP (3389). They can disallow file system sharing. Everything works but the option to map drives they don't let through.Can this...
Hi,Please let me know whether anybody has configured single NAC appliance to function in both Inband and Outband simultaneously.I Have one NAC appliance. I want this to function in inband mode for wireless users and outband for wired users.please tel...
Hello,Has anyone come across a solution where a customer is trying to map 1 public IP to many internal private IP's?Thanks.
We use our ASA as a VPN concentrator and I am seeing a ton of messages that readDeny IP spoof from (0.0.0.1) to 10.x.2.91 on interface UntrustedDMZThe 10.x.x.x address is a user on the vpn logged in from a hotel. he tells me that he only has outlook...
Hi,Do you know if there is a specific maximum number of local users that can be created on a Cisco VPN 3000 Concentrator? If possible, we would like to know the number for the different models.Thanks in advance for your help!Harry
Hi, Can anyone help me to know how do we block gmail and goole talk using Cisco ASA 5520.Thanks in Advance.
Hello,I'm quit new to these boards so I'll try to explain my problem as best as I can.If something is missing or incorrect pls inform me so I can update.I want to do a local NAT before a VPN IPSEC because my internal range is allready know at the cus...
hello, on a PIx 515when i try to apply the upgrade procedure i have this message :Received 2193408 bytesCisco Secure PIX Firewall admin loader (3.0) #0: Tue May 21 08:26:10 PDT 2002Flash=i28F640J5 @ 0x300BIOS Flash=AT29C257 @ 0xd8000An internal asser...
Since we have updated our domain controller to 2003 AD...we are not able to authenticate testing on the VPN 3005...the error it gives is KBR5KBR_ERR_TOO_BIG...which means that certain users who belong to alot of groups are causing the UDP packet to b...
Hi I've been battling with my new ASA 5505 and set it up based on the Cisco configuration example. It's a basic Internal network setup. I can get out onto the Internet fine but the setup will not allow anyone in via the NAT and access rules. Can a...
static (inside,outside) *.*.11.35 192.168.1.3static (inside,outside) *.*.11.36 192.168.1.2access-list 101 permit tcp any host *.*.11.35 eq 80access-list 101 permit tcp any host *.*.11.36 eq 25access-list 101 permit tcp any host *.*.11.36 eq 110access...
We need to migrate our PIX 525 6.3(4) to ASA 5540 8.0. I used the PIXtoASA Tool from cisco and successfully converted the config. THe issue now is when i tried to apply the config to the ASA the following commands are not applied:vpngroup vpn_dolphin...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 02:14 AM | ||
04-22-2024 06:41 AM | ||
04-21-2024 09:36 PM | ||
04-17-2024 12:36 PM | ||
04-17-2024 07:38 AM |
User | Count |
---|---|
10 | |
6 | |
4 | |
3 | |
3 |