Can you update the IPS sensor engine to IPS-K9-6.0-5-E3.pkg using ASDM instead of the CLI.Can you do it in the same place as the IPS signature updates? The update sensor in the IPS configuration area..
Hello,I have a PIX 515e that front ends a SIP trunk for our VoIP call processor. The call processor is in a private network and is NATed at the PIX for VoIP traffic to a 3rd party voice gateway on the Internet. The problem I am having is that when th...
Is there any way to perform a NOT on a regular expression match. For instance, in PCRE it would be !"/[A-Z]+/i". I cannot determine if there is a valid way to do this on a Cisco IDS regex string. Any help or info would be greatly appreciated.
Does anyone have a solution to this problem?Host "CA" has dual NIC. Eth0 has an IP address of 192.168.0.10/24.Eth1 has an ip address of 192.168.1.10/24. The default gatewayon host CA is 192.168.1.254The firewall has three interfaces. E0 has has IP...
Hi,I'm using Clientless SSL VPN, but am not sure if I am using certificates etc, how can I check?Do I need to buy any or can the ASA create them.Thanks
Hi Guys,I have a pretty stange issue. I have several servers inside a pair of ASAs in active/stndby. Wehn i add a static nat for one of the servers, the server can no longer access the internet. When i remove the rule, i can acces the net no problem....
Hi,I have a Cisco 2621XM router setup running IOS 12.4(21a), which provides internet connectivity via an ADSL line. The router also has several site to site VPN's and GRE/IPSec tunnels. Connectivity to the sites via the GRE/IPSEC tunnels work without...
Hi,We decided to switch our internet connection from DSL to fiber with a DSL backup line.I wonder if anyone could help me with the config for the PIX 515E Firewall.The PIX has 3 ethernet interfaces, I would like to create a config that in case of a c...
Hello,I have two CAM in HA and two CAS in HA.I configure the LDAP Lookup for create rule to role allocation.In this configuration are only one windows server to make find the user properties.There are one problem when this Windows servers is down. T...
hi there seems to be a problem with a site to site vpn on my pix 515 (IOS 6.3(3)). it seems that even phase 1 wont initiate and when i enter debug crypto isakmp or debug crypto ipsec, nothing seems to output to screen. (current the secondary pix is a...
Hi,i have strange problem with access by ipsec client: with ASA 8.0.2 all is ok but with ASA 8.0.4 some TCP connection through ipsec client arent association (rdp, sql, etc..). With SSL client on ASA 8.0.4 all traffic is ok too. Sometimes i logging d...
Hi, I have ASA 5520 configured in Active/standby mode. These boxes are connected to two Cisco 3800 series routers. The OSPF is configured here to auto divert the traffic on these routers. On my Active box the ospf is working fine. But at the same ti...
Hi allI'm in search for documentations on upgrading a PIX515ER v6.3(4) to v6.3(5) and PDM v 3.0(2) to PDM v3.0(4) but can't find them anywhere. Can you please help. Any extra tips on the upgrade process is greatly appreciated.
