Network Security

I want to do port redirection for my inside users(port no 8888) to web server in DMZ(port no 80).Case 1:Inside user types in browser http://192.168.101.10:8888Case 2: http://mywebserverurl:8888Inside n/w 192.168.100.0 DMZ n/w 192.168.101.0I have done...

We have a complicated set up of 4 ASA5505's that all have site to site tunnels to a 5th ASA5505 which is connected to our LAN. All the L2L tunnels are up and can access network resources, but none of them can access the internet. I want internet tr...

We appear to be having issues with DPD packets being dropped by our firewalls.The set up is as follows:VPN3005-----pix(6.3)-----ASA(7.0)---Internet----VPN CLientsThe concentrator is running 4.7.2.B and the clients is running v4.8.01.0300.The VPN is c...

I have two PIX firewall(6.3) configured in failover (LAN failover)mode,now I want to disable the failover and willing to use the PIX firewalls in stand alone mode at two different site.Is it possible?How to do that?I hope by simply disabling the LAN ...

Hi, is it possible to get the output of the show connections command using an SNMP MIB query from a PIX515e. I have found reference to the below MIB string but this will only display the connection count and not the actual connections themselves.The ...

I'm trying to find a great configuration guide. I'm in the process of migrating from a Netscreen 10. I've setup my ASA according to the documentation available for the ASA version 8.0 and used ASDM version 6.1 as well. I can ping out of the interf...

Hi, is there command to debug an Interface on an ASA5510 (7.2) ?We are experiencing intermittent disconnections on the outside ASA interface which is connected to our ISP's 1841 router.This is bringing down our remote VPN L2L connectionsI have switch...

I rebooted my ASA few weeks ago. While the admin context shows an uptime of 52 days, the other context shows an uptime of 2 years. Also the admin context is reporting a high memory usage (96%), the context shows 230%.Should not both context show the ...

Hello there,I pulled almost all my hair out and still cannot figure out what I am doing wrong.Here is the scoop:I currently have an ISA 2004 firewall in place that is working fine taking all email for my .com domain.We purchased a ASA 5510 and I am c...

Dear Support,We have Cisco CAM & CAS that is deployed for OOBVG mode when connecting the client machine and trying get web access the client is already in the authentication vlan due to switch management port profile settings but the client cannot ge...

The Problem:The Service "CSLOG" starts notPlattform: Windows Server 2003 R2 of Microsoft VitualmachineEvent:The description for Event ID ( 5 ) in Source ( CiscoAAA ) cannot be found. The local computer may not have the necessary registry information...

Can this be done with zero downtime procedure? Or do I need to go to 7.2.4 then 8.0.2 then 8.0.4. Thanks.

We are trying to setup Cisco NAC on our wireless and we are unable to get Wireless SSO working with our Wireless Control System and WiSMs.We have WPA2 with 802.1X working and we have NAC working, currently without the agent. But after authenticating ...

Hi, I am going to perform some traffic throughput testing with an FWSM and traffic generators. I would like to know if anyone has done this type of testing before, if so can you share your results? Thank you,~AG