Network Security

I am working with a web filtering service company that provides web filtering as a service in a cloud. I can forward web traffic to them via the normal proxy setting in my browser, but I want to be able to do it on firewall level as well, in case a u...

Hi,From a windows PC I can't tracert or pathping though different interfaces on the ASA 5520 or to the internet, is this something that can be achieved?

What 6500 supervisor modules are required to use a FWSM module? More specifically, will the WS-SVC-FWM-1 module run with WS-X6K-S2U-MSFC2 sup module?

Hi,We have a cable(serial) connected Active/Standby PIX firewall setup.When the standby unit recovers after a failure, there is a VPN Bulk Sync process, where the active unit starts syncing the state information to the standby unit.During this proces...

does anyone recall the commands to open ports 5001 on an ASA?thanks

I'm running IOS firewall on 2 different routers. A 2851 and a 2821. Both are running 12.4(3g) Adv Sec images. Both routers are connected to an internal WAN and also to an external ISP such as a cable modem. They also have LAN interfaces. Default...

Hi !!Is it recommended to use windows external database for ACS Authentication

I am trying to connect to a 4255 sensor with IDM,but am unable to do so. I get the following error "Error connecting to sensor.Failed to load sensor.- Error getting config data from the following modules:sshKnownHostsExiting IDM"Anyone know why and h...

I'm pulling the configs off our old 515 firewalls and putting them on our new ASA 5500's. On the 515, we were NATng everything inside to a public address tied to the outside interface (not the interface address itself). Here is the config for the ins...

HiWhy can I telnet through the PIX when there is no reference to telnet in the class inspection default list or in the default inspection traffic list? I see there is a reference to ICMP so that explains why transit pings do not work, but I can^t get...

Hi, I currently have an ASA5540 with the following setupInterface A inside1Interface B outside1Interface C Outside2.I currently have failover setup for connection tracking the Outside1 interface now recently my ISP had some issues and had to redirect...

I have not had any luck locating the boothelper file to update the pix 520 from 5.0 to 6.anything. I have a valid CCO account and have searched and cannot locate this. Anyone have any idea where I can find the boothelper, or a workaround to update ...

hi, I have a customer who has upgraded from pix520 to asa 5520 with csc modul in march 2007. now the customer has a second asa 5520 with csc modul. today we are going on with the failover configuration and now we have a big problem... I tested the hi...