I have two asa 5520. I want to put them in a failover configuration, but there is a problem because only one of them has an IPS module. Is there a way to solve this issue ?
I have two asa 5520. I want to put them in a failover configuration, but there is a problem because only one of them has an IPS module. Is there a way to solve this issue ?
Hi I want to give SMTP acccess to one of the machine in DMZ zone .I am going to allow DMZ access-list IN for port 25 .do i need to allow return traffic in ASA .or editing access list IN in DMZ and patting will allow me to access SMTP on internet.plea...
Hello - I have a PIX 515 (v 7.2) and a ASA 5520. I have a VPN tunnel built between the 2 but I can not get them to connect. All I get are these messages:Jun 06 08:43:13 [IKEv1]: IP = x.x.x.x, Error: Unable to remove PeerTblEntryJun 06 08:43:46 [IKEv...
Hello everybody,I am a bit new to cisco routers but not to routers in general (i used to work with zyxel, fortigate and dlink). My question is about an Cisco 857 which i manage by SDM 2.4 interface.It is about firewall. In tab "aplication security", ...
I have ASA5520 with AIP SSM 20 and I am using IPS Manager Express. For how long can AIP keep IPS events? How can I save events before the logs are recycled? Thanks in advance
Hi all,I have a question about the network objects on an ASA running V 8.0(3). After creating an network object with the corresponding netmask in ASDM I cant see it via CLI. Thers just the name without netmask. Where is the netmask stored? How does t...
HiWe have a FWSM running ver 3.1(5). We are running into memory problems on one of the contexts/partitions. Apart from using the resource acl-partition <number-of-partitions>command, is there any way of manually reconfiguring more memory to the parti...
Is there a way to log Remote Access VPN events on ASA
I've just purchased this model including the security plus license. The running ASA version is 8.0(2). The ASDM correctly shows the Security Plus license, as well as the new 100 VLan Max.I am unable to turn the ethernet0/0 or 0/1 ports to 1000. ...
When I add an access list to allow a service group access through the firewall all traffic is blocked config posted below.: Saved: Written by enable_15 at 08:48:32.873 EST Tue Jun 3 2008!ASA Version 7.0(7) !hostname ciscoasadomain-name my.asa.orgenab...
Hi, We have ASA 5505 FW in Production which is working fine but the inside NOC users connect with Miami Servers which is located at data center and we can connect those servers by using Lucent VPN client and for giving access the servers I have make...
Hello, We have a PIX 525 with a big configuration, and i would like to enable the option traffic trough the firewall without address translation. We use already translation, so i just want to know if it modifies something in the current configuration...
Hi,anyone can tell me , please, how i can reset to the original configuration, to default state, a cisco 1802 ???i'll apprecciate your helpBest RegardsGerardo Valdez Andrade
Hello,we have installed a CSC Content Security Module in an ASA5510. Software Version is ASA 8.0(3) and 6.2.1599.3. We have some trouble with ftp file scanning. If we use for example FileZilla and upload a file there is always a timeout and the file ...
I have branch locations that have dynamic ip addresses that need to create a vpn connection to my PIX 515. I currently have the PIX setup with static crypto mymap statements that have the static ip address given by the ISP, but want dynamic to work ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 02:14 AM | ||
04-22-2024 06:41 AM | ||
04-21-2024 09:36 PM | ||
04-17-2024 12:36 PM | ||
04-17-2024 07:38 AM |
User | Count |
---|---|
10 | |
6 | |
4 | |
3 | |
3 |