ASA5510 8.0.3 rebooted itself yesterday. What could be the cause and how can I troubleshoot it?
ASA5510 8.0.3 rebooted itself yesterday. What could be the cause and how can I troubleshoot it?
Hello,Does Cisco ASA have a capability to check packets and drop some packets with say Skype or MSN or ICQ content?Another question: if we use WebVPN client to connect to our network through ASA, can we use some certificates for that in addition to l...
I upgraded two PIX 525's from 7.2(1) to 8.0(3) and I can no longer manage them across the VPN tunnels. What changed concerning management between 7.2 and 8.0? I can manage them fine as long as I'm on a machine that is behind the inside interface. ...
I'm having issues with a new ASA implementation. I have some direct one-to-one translations specificed and I want all the rest of my outbound traffic to go out the global PAT address, but for some reason, all traffic, including inside hosts with outs...
I have a DNS on the inside of my PIX, with IP 10.1.1.3, trnaslated at PIX as 10.1.2.3.Now an application like Active Directory client accessing from Less Security interface access the DNS as 10.1.2.3 but as on the local DNS there is no Host name agai...
Dear friends,A general question on Event Action filters. There is a signature with sig ID 6257. The following is the event action filter configuration: service event-action-rules rules0filters edit DHCP signature-id-range 6257subsignature-id-range 0a...
Hello all,please is it possible to distinguish two remote access groups on radius server?For example i have two groups. One for employes and second for externalist.I authentificate them on one radius server.It is possible to distinguish between these...
We have FWSMs (version 3.2(2) ) in active-active (2 chassis). The customer has a switch, which has separate connections to both firewalls.When one link fails, the FWSM switches over, just as aspected.However, what happens if the customer switch goes ...
Hello,Next Saturday it is planned that I upgrade our active/passive multiple context FWSM Modules from 3.1.1 to 3.2.5.I would really appreciate if I could get as much information from people who have already done this and what their experiences were....
i have an ASA5510 trying to configure multiple IP's to outside interface but cannot. I have it on my pix515 but do not know how to do it in ASA device. i am using my CLI config from the 515 to figure out in the GUI for the ASA
Does an ASA in both transparent mode and standby state pass any type of traffic?Paulo RoqueNetwork Engineer
I am trying to configure a pix firewall 506 E SW(6.3 (5))to run DHCP server for its inside hosts. Below is the config. For some reason, hosts say they are unable to contact the DHCP server to get leases. Any help on this is highly appreciated.Inside ...
Hy i have a ASA5520 whit the SSM_AIP10 Module installd.. I can not connect to the Module via ASDM (ther is a Tab IPS) can someone help me?Thanks and salutation from switzerland..
We recently replace our checkpoint to cisco ASA. In our old firewall every tcp/udp ports outbound are blocked, ofcourse except for port 443 and 80. With the ASA we just started blocking all the ports outbound and I noticed that our DNS servers keeps ...
Hello,I should deploy a NAC solution consisting in a CAS, a CAM and a Guest Mgr to provide wi-fi guest access to an organization. Every server is a NAC3310 appliance.All components of the solution are going to be deployed entirely in an extranet area...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-27-2024 05:00 PM | ||
04-26-2024 02:14 AM | ||
04-22-2024 06:41 AM | ||
04-21-2024 09:36 PM | ||
04-17-2024 12:36 PM |
User | Count |
---|---|
10 | |
6 | |
4 | |
3 | |
3 |