Network Security

PIX 525If I have these configured:___static (inside,outside) 209.129.192.162 10.40.5.62 netmask 255.255.255.255 0 0___access-group acl_outside in interface outside___access-list acl_outside line 5 deny udp any host 209.129.192.162 eq 60381 (hitcnt=12...

HiI am trying to connect to my office from home through a windows based VPN (win 2003 and win XP) and have issues with it. I have a PIX 506E firewall in the office and there is no firewall at home.Can someone advise what other configuration is needed...

currently i am not seeing any alerts being reported? how do i verify that all services/engines needed are running?thanks

Hi,I need to change an interface security level from 100 to 85 while it is live. What are the implications for doing so? Will each new packet be treated with the new level? And most importantly will there be any downtime or other side affects which w...

I have ASA 5520Cisco Systems Version (1.0(11)2) #0: Thu Jan 26 10:43:08 PST 2006 I was working on it and wrongly I use this comand < erase disk1: >I tried to restart it an...

We are upgrading out internet to a bonded t-1. Two new circuits have been installed. For some reason, the IDS will not allow internet traffic via the new circuits. Everything is exactly the same from a IP address/Network standpoint. The only differen...

Hi guys. We have a FWSM running a 3.2.1, version, and we need to upgrade to 3.2.2.We uploaded the new version to the flash.Now, we neet to force to boot with the new version using the command boot system flash xxxx.bin o that's not necessary in order...

Please, can someone help me to decide what is better for using in a lan- wan enviroment to close L2L and remote VPN, and to use as firewall??I attach the drawing of the network.

We have a hub and spoke architecture:HQ - PIX515, Cisco 3662 Router Location1 - Cisco 1600 RouterLocation2 - Cisco 1600 RouterLocation3 - Cisco 1600 RouterLocation4 - Cisco 1600 RouterEach location is connect to HQ via a Point-to-Point Full T1.Each l...

Hi there i have a problem with a site to site connection with a company we work with. The company works with a checkpoint ngx-1 R65 en we work with Pix. The thing is that we VPN comes up. I can ping host at the company side and traffic is flowing. Th...

who can tell me alias command's functiontopology like this:inside lan ------pix---- outside internetlan ip : 192.168.1.0lan server ip : 192.168.1.100outside ip : 60.60.60.60outside server ip : 60.60.60.100somebody tell me the alias can achieve funct...

We have an ASA 5510 and when we do an isp test from the inside interface with a laptop directly behind the asa we get poor internet traffic downloads but if we disconnect the ASA and connect the laptop directly into the internet pipe and repeat the t...

I'm testing equal security (80, 80) on internet facing and intranet facing interfaces.I can originate traffic in the intranet side and receive the retun traffic from internet side.However, I'm not able to receive traffic when originated in the intern...

How to config ASA in Transparet mode (A/A FO) to permit HSRP packet cross through,THANKS VERY MUCH!