Network Security

When a workstation behind the ASA tries to initiate an AT&T client authentication session the following happens on the ASA:-3-way handshake completes to the auth server.-Push packet from the client hits the inside interface of the ASA but does not ge...

I have pix515E with 6 interface. Now one outside interface configure. But i want to create two outside interface. That means that two internet connection attach directly on pix515E.Pls suggest me what is procedure to implemented it.

I have read several posts on this and I still don't quite understand what needs to happen. I have a web server in the dmz (10.10.30.10) that needs to access a SQL server on the internal network (192.160.0.7). How do I allow this access. I currentl...

I wasn't sure how to title this exactly, but here's my problem:We have a web server inside the firewall with an inside address (inside). There is an outside address (outside) that is routed in through the firewall to that server.The DNS, of course, ...

I know you can clear the application partition passwords from the maintenace paritition, and you can reset the maintenance password from the application partition system space; but is there a way to reset either when you are locked out of both?Thanks...

Hi,I installed a AIP SMM module in an Cisco ASA 5520 device.After poweron the status and power leds on the module are ok.When I am trying to access the module for basic configuring (by the ASA console), I get this message:ASA5520# session 1Opening co...

Good morning,We have 2 pix 501 that are experiencing the same issue.Each 15 hours the ram memory is almost full and the pix crashes, i mean, during this period the amount of memory in use is growing up and after 15 hours the are no free ram available...

I've been handed an IDS 4210 and asked to put it in production. I don't have experience with IDS and am not sure how to arrive at a desired result and how the device should be configured. Is it possible to receive a config guide or admin guide as w...

Hi! I suspect I have software version 6.2 on my PIX, however I am not sure.I need to remove the password on my PIX and as I don't know what software version is on the device; I don't know what binary to grab for flashing.Does anyone know how to deter...

I'm trying to walk a someone through changing the PPPoE authentication password on an ASA 5505. I dont have it in front of me soI dont remember were to navigate on the ASDM GUI. Where do we need to go to make that change?

I have (2) networks I'm dealing with in this situation. NetworkA has firewallA (pix 515e) with computerA behind it. NetworkB has firewallB (asa5510) with computerB behind it. I successfully use a software VPN client on computerA to connect to firewal...

Hey, I am really new to this, and need to setup a New Firewall for my location.I am trying to get into the pix 501 with my browser, but am getting a Java error.I use the https://192.168.1.1/startup.html addressas instructed, and get the pix Username...

I am confuse about using and functionality of the procol handling with command fixup protocol <protocol>can you explain the real use of this or can you point me to some documentation about that?thanks