Network Security

ASA 8.0(2)ASDM 6.0(2)All of a sudden our ASA 5520 stops responding to IPSEC clients trying to connect (both tcp/10000 and udp/4500). We don't even get any attempts in our logs. It works one day and stops working another. All other communication inbou...

Has anyone seen a link or could summarize changes between ASA SW 7.22 and 8.0 code. Since we are change major code #, I expect major command line differences. I see minor changes in attack handling. So I'm missing something?

How to configure IPS SSM-20 Module in ASA 5520.

Hi allIs there a way to import certs which reside on a Windows 2003 server onto a Cisco Pix? Our Pix requests authentication from clients for access to certain sites, but we're getting an "untrusted certificate" error in the client browser before and...

I have two ASA ,one in Head office another in Branch office.I need to initiate VPN from Branch to Head office , where both the sites have dynamic ip. Im using a DNS resolution in HO for the dynamic ip . Plz send a sample VPN CLI configuration for bot...

I'm getting ready to migrate our 3030 concentrator to an ASA5540 which came with 7.2 software. We will only be using the ASA for IPSec VPN (client and lan-2-lan) and SSL client access. No firewall useage at all as this will be in parallel with our ...

Has anyone see the new Cisco Doc for importing a RDP plug-in(Tabbed Doc)? Any comments or suggestions?http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c0603.shtml

My situation (I'm very new to Cisco and networking)My company has some consultants who will be using the software VPN (not the SSL) to access our network through an ASA 5510.I created a VPN for them and a group policy that hands out 192.168.12.xxx wh...

Hi ,I've to configure VRRP on my Nokia IP 350 boxes. The setup should be as given below:FW_1 - Cisco 6500 SW_1-Internet Router_1FW_2 - Cisco 6500 SW_2-Internet Router_2I will configuring VRRP for this on FW;s & HSRP on Cisco switches.I've following d...

Hi all, I have an ASA5510 which serves as an DHCP relay for L2TP/IPSec VPN Clients. The VPN clients connect to a CVPN3005 concentrator on one off the dmz segments on the ASA. The concentrator then does a DHCP request for the client to an DHCP server ...