Network Security

Hi Sir,Can anyone clarify whether we can terminate site-to-site or remote-access IPSec VPNs on the FWSM version 3.1 or 3.2? I understand FWSM 2.3 does not support this. It only supports telnet over IPSec to the outside interface of FWSM for managemen...

anyway to view packet payload of captured alerts from ios ips ?

IF IAM INSTALLING AN IPS MODULE ON A 6500 CORE SW WITH MULTIPLE VLANS, DO I STILL NEED AN IPS APPLIANCE?AM I AUTOMATICALLY RUNNING INLINE IPS IF ONCE I INSTALL THE MODULE ON 6500?THANKS.

IPS module(ASA-AIP-10-INC-K9)installed on ASA 5510.Shows up with 'sh module 1' command. Module has been stopped, reset, reloaded; several times. But still shows: 'Recovery Partition Version 1.1 - 5.0(2)'. Doesn't fetch image from TFTP server, when re...

Can anyone recommend any tool/utility that can be used to monitor sessions through a PIX/ASA in real-time?

Hi All,I am a newbie to Cisco PIX 501, i have recently joined this company where they have servers at Data center and they are behind this PIX501. All the configuration were done by the former sys admin.Now i have installed Advenet Application Manage...

We have a site-to-site VPN set up between our HQ (10.10.0.x) and a remote site (10.20.x.x). The HQ device is a ASA 5540, and the remote device is an ASA 5505. version ASA 7.2(2)The tunnel is up and passing traffic. I can ping from any device on the H...

Does a PIX 501 provide URL filtering based on URL name? If not, can you recommend a better Cisco product for a small business?

I need to upgrade the ASDM on our FWSM and according to the Configuration Guide I need to do it from the system execution system becuse I'm using multiple contexts. However when I test the connectivity by pingig my tftp I get replies ?????. What am I...

is it possible to establish two IPSEC VPN tunnels to a single remote peer? I currently have two ISP connections and i wanted to make two tunnels for failover but im not sure if there is an issue on the tunnel groups since i would end up having only o...

What is the correct why to open a group of ports like 5555-5585 TCP and 2326-2373 UDP for video conferencing.

HiI'm experiencing a strange problem with NATing on a PIX 515 running 6.3. I have 2 statements:nat (inside) 1 10.0.0.0 255.0.0.0global (DMZ2) 1 192.168.194.0 netmask 255.255.254.0With this config I can get no packets at all to pass from the inside an...

I want to see which items are modify.show run command show all running configuration.But i want to see only modify record.

I have a Pix 515E active/failover IOS v7.2 The failover process works perfect. I test powering down one unit, and then the other en works perfect. But, as soon as I do "write stanby" in the active unit, the passive unit goes down (the insde interface...