Network Security

I am receiving the message %IDconf: fail to load file flash:IOS-S281-CLI.pkg when trying to copy pkg from flash to the ips5 directory. Help !!

I know I can configure MARS to pull data from the REM Security Management Console version 1.0, but is there also support for later versions of REM? Does this matter and has anybody seen compatibility issues with the later versions?Thanks!

I am new to Cisco PIX configurations and need help setting up an email server behind a PIX 501. Actually I am setting up a Barracuda spam filter which will receive the email first for scanning and then it forwards it to an Exchange server.The PIX is ...

Hi i have been getting this message on my FWSM and was wondering how i go about resolving this.CheersKev

Well maybe it's a stuipd question however...We have a customer (financial sector) where we must replace the cs-mars 100 because of a problem on the mother board. Since harddisks must not leave the site (security concern) we must replace the disks. Me...

I am troubleshooting a PIX 515E. PPTP has worked fine for as long as I can remember. Last week it stopped working. I can't telnet to port 1723 to the outside interface. The Pix uses radius as auth. I can ping the radius servers fine. Can't telnet to ...

Hi!,I want to configure my sensor such that it sends a reset packet if it detect a file "VirtualR3D.exe".I created a custome signature with STRING.TCP, but it does not work. Engine: String.TCPService Port: 139,445Regex String : [V][i][r][t][u][a][l][...

Hi,Can i permit few IP addresses from any subnet to access Internet for example. In other words if i have the following subnet 10.10.10.0/24 and i need to permit hosts at the ACL from 200 to 254 to access the internet only. If yes how?Thanks in advan...

Hello everyone,What is the best way to setup the PIX 515E for FO? I read that serial + ethernet is the best way to go, this seems to be what I want to do.How do I go about setting this up in this manner? Thanks for your help. I get bad search resu...

CSA did not prevent a machine from sending SMTP traffic to thousands of internal machines despite the fact that the user terminated the action.Does "concurrent query limit exceeded" means that CSA was overwhelmed and just could not handle the volume?...