Hi, I have a problem with a client with a Cisco 2811 router acting as a Cisco Easy VPN Server, after installing everything he can not connect through the VPN client to the server, any idea what could be happenning
I have a PIX501 setup going to a 3005. The vpntunnel is up and running fine. The users behind the pix can seem to get to the internet. They can get to the network behind the 3005. any help would be appreciated.
Hello.There is a new ASA model, ASA 5505. This has several licenses: 10 users, 50 users and unlimited conections.The question is, ?Is it possible to upgrade a 5505 10 users-license to a 50-user and/or unlimited-users?Regards,
I know the resets are done by the sensor, not the PIX or router.Is it possible if my IDS 4235 is working in passvie mode not inline to reset tcp sessions..? If yes than please explain how it does..
I have two networks currently. Network A & B. Network A is a remote location where users connect to B through VPN. Once they establish a tunnel they rdp a terminal server. On this terminal server there are several printers installed. These prin...
Hi i have finally managed to get into my PIX Firewall although i can only seem to telnet into it. I have to do some networking changes regarding our internal networks. Currently my PIX uses three external IP Addresses and translates them into addre...
I cannot seem to set my PIX to allow http access (ie: the web interface). I tried http server enable at the command line and it does not work. when i type "show http" i see the following: http server disabled 192.168.8.0 255.255.255 0 inside and wh...
Hi,has anybody tried to implement a NAT exemption and static NAT for the same source. What i want to achieve is that one host of the internal network will be not natted like the complete network and also has a static NAT for another connection.I have...
All-I am in a lab environment working on a project that, among others, includes Cisco's NAC product.We are responsible for providing basic network services, such as DHCP, WSUS, Anti-virus and Certificate Services. We have completely loaded and teste...
I have a 1841 router that is going to be an Internet facing router for a DR site.Normal operation is to have the main site VPN tunnel to the remote site.An IOS firewall policy blocking all access but throught the VPN tunnelIf the main site were to ha...
We had a firewall failure over the weekend which crippled a remote site. We have a VPN concentrator at another main site and we were wondering if we could use this for a "backup" tunnel for the remote site (the primary line is a tunnel to a separate ...
Hi everybody, i'm try to configure a pix 515. It has 5 eth ports. One of these is connected to our public ip, one other connected to out intranet. And that's ok we can use internet without problem.The problem rise when I configure one other port wit...
Well, we are using IDS 4235 off line with mirrored ports and executing acl on external router..I want to build a custom signature which will reset the tcp syn sessions if more than 10 or 12 from a single IP...can someone comment how it's gonna be wit...
