We have a UR license, does this include the the ids module? When I look at the policy to interface mappings it shows none and does not give options. Missing something? thanks.
We have a UR license, does this include the the ids module? When I look at the policy to interface mappings it shows none and does not give options. Missing something? thanks.
Hi,I am using a PIX 515 (its not 515E), it had two 32MB DIMM (=64MB RAM) and is running 6.2(2) ver PIX OS. I am planning of upgrading the OS to 7.0(4) and had ordered PIX-515-MEM-128.I removed the two 32 MB RAM DIMMs and installed the 128 MB one, but...
I have recently set up a VPN to a remote office using PIX 515s IOS 7.2(1). We are sending Video Conferencing traffic over the VPN which is having to compete with the normal Internet traffic through the HQ PIX.What is the easiest way to prioritise the...
hello,Is it possible to use policy-based routing on an ASA 5505 with the base license to statically load-share trafic through two Internet ADSL connections (as we can do with a Cisco 1841 router) ?Thank you in advance.
Does the command "no fixup protocol smtp" have to be performed in a Maintenance window so as not to impact current connections when performed on the FWSM v2.3(4)
Hi All;I have a 871 router on which i want to implemet a firewall for my internal users so that all protocols are blocked except Remote Desktop SMTP POP & VPN so only clients who want to use the above protocols can access my local IP range is 192.16...
Earlier this week our ISP shut us down for a while. They claimed that a DOS attack had come from within our network. I run Symantec Corp AV on all computers and everything is up to date. The majority of users are not administrators on the local machi...
Hi Everyone, A quick question in relation to allowing two DMZ servers communicate with an Inside server. I understand that to enable the DMZ servers to initiate comms with the Inside server I need to put in the following commands: NAT(INSIDE) 1 10.0....
I guess I have several questions here. I have a 2821 router in place that is the VPN peer to a DR site with a 12M fiber connection to the Internet. The peer has 15M fiber. The VPN is configured: crypto isakmp policy 1 encr 3des authentication pre-sha...
Hi,My IDS Signature not updated. Do you know any reasons can prevent this? Previously, no issue.
I'm running into a similar problem where I can edit the firewall context config files on my 6509's FWSM by tftp'ing them over to a server, editing them there, and tftp'ing them back. Problem is, once I get them there, there's no way to merge them wit...
Here is the situation ,my client will move a Cisco router running GRE to a new site,the cisco router extenal IP ,PIX external IP and ISP router in same /29 subnet; the new IP scope is PIX and ISP router within a /30 ip scope and PIX can have /29 subn...
Hi!I've got a question concerning the IPS module.How is it possible for the IPS to dynamically change any of the existing ACLs on the firewall module in case of an attack e.g.?The reason i ask is, because there seems no possibilty for me to script an...
My company just got me a laptop since I have been traveling a lot lately, however I am unable to use our VPN Client. Below are the specs on my laptop and VPN Client.VPN Client 3.6.4Windows XP Home SP2AMD Turion 64 Mobile 1.6 GhzFirewall DisabledViru...
Hi,I have two SSM-CSC Modules. Each module is in a different ASA. The ASAs are configured in failover.However, the failover of the CSC Modules don?t work. Can anybody help me?.Thank you very much.Best RegardsNuria
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 05:45 AM | ||
04-26-2024 02:14 AM | ||
04-22-2024 06:41 AM | ||
04-21-2024 09:36 PM | ||
04-17-2024 12:36 PM |
User | Count |
---|---|
10 | |
6 | |
4 | |
3 | |
3 |