Network Security

Hi,I want to install a VeriSign certificate on my active-standby HA pair. Do I need one cert or two?Thanks,Paul

Guys I want to put a pix on my home broadband connection,Now I dont have a static IP, I dont mind changing some settings every now and again though. I wanted to use my pix to make a VPN into my office network. I know how to do this but I need to put...

I have configured the ASA backup interface command to the specs on the website below. The problem isnt that the ASA is failing over but it's not allowing my internal users to get out once the backup interface comes online. I am able to reach it via ...

Hi,I have a problem with DHCP relay agent on pix configured for simple PAT (Lab envirement)All works fine with client ip statically configured:***DHCPRelay(config)# sh conn1 in use, 4 most usedTCP out 193.168.10.201:23 in 172.17.10.2:2022 idle 0:00:0...

In the IPS Manager (CSM 3.0) Configuration > Updates > Update Network IDS/IPS Signatures Clicking on Apply (For instance, Update File: IPS-sig-S242-minreq-5.0-6.pkg) it appears the following error:Object update failed. Unknown update type.What is the...

I have QOS configured on a router and when I do "show policy interface serial 0/0:0" I see packets under the default section of the DSCP column. I have enclosed an example. Can anyone explain what this column section is for, and why if I should see e...

Does PIX 515E 7.0(x) support SFTP? Are there solutions or workarounds?Regards,Santi

Can anyone explain why there appear to be two streams of PIX OS versions and the major differences?THX

The ASA SSM-10 and SSM-20 IPS modules for the ASA-5500 series products can only be managed via CSM (there is no support via VMS). I have been trying to figure out how to add the IPS functionality of the SSM-20 module to the CSM server so I can manage...

I have installed some PIX 501 with 6.3software Cisco Secure.I need to permit traffic to application layer https.Does somebody advice me about configuration command or documentsabout ?best regardsLorenzo

I am trying to configure H323 inspection on an ASA5520 version 7.2(1). The calls connect, but the embedded IP is not being changed, so there is no inbound audio/video. If I configure the video endpoint to embed the public address (behind FW setting, ...

I was not able to get the commandline prompt thru hyperterminal. the only thing that comes from the PIX device is the PCI Device Table

I know this is unsupported, but I was wondering if anyone has tried loading the CAS/CAM ISO on a VMware virtual machine? I am considering doing this for testing/lab/learning for a smooth implementation in the field.If you have, did it work? Any gotch...

Hi,I would like to create a signature which fires when a server reports HTTP Not found.For testing purposes I have used space ([\x20]) for matching regexp. It does not work. When I set the direction from "from-service" to "to-service" it works. Does...

Which analog PIX's command - debug packet src/dst x.x.x.x netmask y.y.y.yon ASA device?