Network Security

I have a problem with dlsw through pix firewall, I checked ip connectivity and it is ok, my local peer in one router is 10.90.231.1 and its nat is 168.165.5.1, the remote peer is 128.6.252.254 and its nat is 168.165.2.67, I mean nat is in both way...

am soliciting your input on a problem that we are having hoping that you may be able to assist. Currently we have a PIX with three interfaces Inside, Outside and DMZ. We have a web server sitting on the DMZ that is hosting an a site allowing users...

Can two unit of PIX525 UR work as a failover unit ?

Hello,I have a host of remote users and offices that VPN to a PIX 520 daily, for access to a central system. We are implementing a DMZ to bring web and dns in house the higher ups here are afraid to execute a "clear xlate", for fear it will kill all ...

Is the qos feature planed for a next version of the pix ? (V3pn) (if any a date would be useful)Thanks

I am testing with the following configs:nameif ethernet0 outside security0nameif ethernet1 inside security100nameif ethernet2 DMZ security50ip address outside 66.100.123.85 255.255.255.128ip address inside 66.100.123.129 255.255.255.192ip address DM...

Would I be able to pass DHCP through two different interfaces on the PIX? Basically, I would like to have my DHCP on the inside interface, to still hand out addresses on my DMZ interface. I realize that it would be more prudent to have another DHCP...

Here is the info from Sh VerHardware: PIX-515, 32 MB RAM, CPU Pentium 200 MHzFlash i28F640J5 @ 0x300, 16MBBIOS Flash AT29C257 @ 0xfffd8000, 32KB0: ethernet0: address is 0050.54fe.ef68, irq 101: ethernet1: address is 0050.54fe.ef69, irq 7Licensed Fe...

I am trying to terminate two ISP connections at local router at the outside interface of the PIX firewall. As I have to assign two IP addresses from each one of the ISP to the router LAN inteface and PIX outside interface, therefore I have to assign ...

I installed a PIX-515 to protect our WEB Server fron the Internet. The employees in the private zone connects also to the WEB Server. The WEB server is in a DMZ.The WEB Mester looks for statisctics on the utilization of the WEB Server (Number of c...

A pix 520 with 3 interfaces, with operative system version 5.3.4, 6.1.2 and 6.1.4 perform a reboot every 6-7 min. when their interfaces are connected to the network. The following message appear on console connection:Watchdog timeout failure! Please...

Hi,I want to know how i can restore enable password from Cisco PIX Firewall.Thanks

Hello,I am trying to set up a video conference through my PIX Firewall. The client software I'm using is MeetingPoint (not sure which version, but I think the latest). I have the h323 fixup enabled on port 1720 and I have access rules for the clien...

Does PIX 501 (ios 6.2) support NTP and turbo ACLs? When I do question mark under config t ntp is not displayed. Same applies to turbo ACL option.I haven't found any info that 6.2 is on 501 is a limited version and doesn't support them.Any advices?

Hi, I have upgraded the PIX 525 from version 5.3(2) to version 6.2(2). The upgrade was successfull but I have noticed that the command isakmp identity hostname was no longer in the config in 6.2(2). Correct me if I am wrong, I do not think the comman...