Network Security

I'm thinking of installing a third NIC in my PIX and using it instead of a router downstream. I need to know that I won't lose any VLAN capabilities by doing this?Here's a simplified map of what I'm planning:Internet | --VLAN-- Other campus net...

Hi Guys,We have a pair of PIX 515UR with 6 Interface and we're planning to split our network:Security0 - outside,internetSecurity20 - FailoverSecurity40 - DMZSecurity60 - End User NetworkSecurity80 - R&D NetworkSecurity100 - Inside, Bastion Network (...

I have been asked to give a weekly report on one of our firewalls and I am not sure what the best information would be to convey. They want to know baseline and also usage and if we are reaching capacity on this firewall. I have the PDM running which...

I'm in the process of moving the configuration andexternal services for my pix firewalls. An issue I'mtring to fix is the syslog coming from the pix firewall.Right now my pix is using the default of UDP syslog to a Unix syslog deamon. This has been w...

Let me paint the scenario...I have a PIX 520 4.4(4) 128MB, unlimited connections with 3 interfaces (inside, outside and DMZ)I use NAT, STATIC and CONDUIT. My external interface is connected to a (Fujitsu)Verizon DSL modem.All is working fine, except,...

My administrator needs access from outside the network. He is currently using Timbuktu (like PC anywhere) I need to get through the firewall (PIX 515) to the servers. Timbuktu uses TCP ports 1417-1420 and UDP ports 407. I have written conduit stateme...

Is there any way to block Code Red worm on PIX just as it can be done on Cisco IOS?

Is it possible to log the xlates occuring in a PIX firewall so I can go back later and see what internal address mapped to a particular external address? We have our xlate time set rather high because of the high volume of use our students have on t...

We just purchased a PIX 515 firewall and this is my first experience with Cisco equipment. I installed an extra Ethernet card, and when I boot the firewall I get a status message of:Maximum interfaces: 2Additional 1 interface(s) is(are) disabled.Did...

Has Cisco updated the syslod server (PFSS) for Windows 2000. The one that I have says it wants only Windows NT 4.0. Or for that matter a good, free/cheap syslogd for Windows 2000 that is available anywhere?Thanks,Eric

We are setting up a pix firewall with different clients and different networks off each network interface. What is the best way for each client to be able to remotely manage their servers without giving them access to anyone elses network? One-to-o...

What are some major differences between Cisco PIX and an IOS firewall? Thanks in advance.

Hi All ,This is our network diagram we plan to setup | |-----------ISP1 | | |---GW----| | | | |----------ISP2 | | Inside NW DMZ OusideOut network connected to 2 ISPs and we plan to ...

We are going to multi-home w/ 2+ connections to different ISPs in different cities. I've got a lab setup, but am struggling with a design concept. I have 2 perimeter routers, 2 PIXs, and 2 internal routers that connect the two sites via our private f...

Here is my situation. My LAN users must enter either my Web server name or internal IP address to get to our Web site. The CEO wants to be able to type in the URL (company.com) to get to the site. I have our LAN protected from the outside world with...