07-23-2013 07:23 AM - edited 03-11-2019 07:15 PM
Hi everyone,
When i ssh to ASA and ran the command
show asp table socket i see below
show asp table socket
show asp table socket
Protocol Socket Local Address Foreign Address State
SSL 000035c4 192.168.100.3:443 0.0.0.0:* LISTEN
TCP 00005d5c 192.168.100.3:22 0.0.0.0:* LISTEN
TCP 00006f5c 192.168.101.3:22 0.0.0.0:* LISTEN
TCP 00009314 192.168.2.3:22 0.0.0.0:* LISTEN
TCP 2f9ea0f4 192.168.101.3:22 192.16.3.5:55746 ESTAB
Where under foreign address i can see my pc address 192.168.3.5.
Need to know why other foreign address are showed as 0.0.0.0*??
will by default ASA will always show 4 foreign address as 0.0.0.0*?
Regards
Mahesh
Solved! Go to Solution.
07-23-2013 09:01 AM
Hi,
It seems that you are opening port 443 and 22 on your ASA. This can be checked by using below commands:
- show run http
- show run ssh
I don't think by default it will show any open port. This is because by default the behaviour on ASA is that all ports are close and you have to open port that you want to open/use. Which on router, it's the opposite, by default all ports are open.
HTH,
07-23-2013 09:01 AM
Hi,
It seems that you are opening port 443 and 22 on your ASA. This can be checked by using below commands:
- show run http
- show run ssh
I don't think by default it will show any open port. This is because by default the behaviour on ASA is that all ports are close and you have to open port that you want to open/use. Which on router, it's the opposite, by default all ports are open.
HTH,
07-23-2013 10:09 AM
Hi Rudy,
Regards
MAhesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide