Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SG200 switch driver not working

I have tried the "Cisco Small Business 200 Series Managed Switch" driver on both an SG200-08 and an SG200-50 switch and on both I get an error that the "Selected Device Driver is Invalid".

Is this not the switches that this driver is referring to?  Is there a setting that has to be enabled on the switch for this to work?

7 REPLIES
Bronze

SG200 switch driver not working

Hi Derek,

I've reached out to the appropriate contacts for this one, I'll let you know once I have more information.

Have you tried deleting the SG200 and adding it again?

Thanks,

The OnPlus Team

New Member

Re: SG200 switch driver not working

I have retried the driver several times. Or are you saying to delete the switch and let the OnPlus rediscover it?

Sent from Cisco Technical Support iPhone App

Bronze

Re: SG200 switch driver not working

Yes, try deleting and the switch.

Bronze

SG200 switch driver not working

Hi Derek,

After some additional research the SG200 is currently not in our supported devices. It is on our list for future support. Thus, the device driver should not have been listed. We will be removing the device driver from the list. I apologize for the confusion.

For current device support, please refer to: https://supportforums.cisco.com/docs/DOC-17501

Thanks again,

The OnPlus Team

Bronze

SG200 switch driver not working

Derek - This discussion has brought up some thoughts about support for the SG200. Can you tell me the firmware rev the SG200 is on?

New Member

SG200 switch driver not working

My SG200-08 switches are running 1.0.2.0.

My SG200-50 is running 1.0.0.19 (just realized a few days ago that a newer version is available but haven't had time to update yet.)

New Member

SG200 switch driver not working

Just noticed that my SG200-50 has automatically discovered a driver now and after entering the login credentials, it appears to be picking up some additional info. 

However, my SG200-08 switches haven't picked up the driver.  Do you know if these will be added or not?

564
Views
0
Helpful
7
Replies
CreatePlease to create content