Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

15454 BLSRs

With the newer releases is it possible to do a 4 fiber BLSR (or) 2 seperate oc48 2 fiber blsr's in the same shelf?

With the 10G 15454 can you do multiple oc48 2 fiber BLSRs in the trib slots?

1 REPLY
Bronze

Re: 15454 BLSRs

The following specifications are defined for the G1000-4 card:

Part Name: 15454-G1000-4

Part Number: 800-08578-01

CLEI Code: SNP8KW0KAA

G1000-4 cards are equipped with four GBIC connectors used for optical cable termination. GBICs must be ordered separately. The G1000-4 cards are rated at 62 watts per card and operate at ambient temperatures ranging from -5 degrees Celsius to +55 degrees Celsius.

Before you install the G1000-4 card to an ONS 15454 node, the node must be running Release 3.2 software or greater, must be provisioned with TCC+ cards, and must be provisioned with the XC10G card in the new (Release 3.1) ANSI shelf. If a G1000-4 card is inserted into a node that is provisioned with either XC or XCVT cards, the new card will not be recognized. Both high-speed slots and low-speed slots support the G1000-4 card. The high-speed slots are 5, 6, 12, and 13. The low-speed slots are 1-4 and 14-17.

Try:

http://www.cisco.com/en/US/products/hw/optical/ps2006/prod_release_note09186a008009172b.html

120
Views
0
Helpful
1
Replies