What platform and OS are you inquiring about? I wasn't aware that any of Cisco's routing platforms offered OC-1 interfaces. They are in the SONET/SDH world but there circuit aggregation usually means entirely different things than what you seem to be asking about.
You are correct that MLPPP is only for T-1/E-1 interfaces. Reference.
This looks to be a form of Virtual Concatenation (VCAT), that is available on most of the 15454 data cards.
Background from Juniper website:
" The JUNOS software enables link aggregation of SONET/SDH interfaces; this is similar to Ethernet link aggregation, but is not defined in a public standard. The JUNOS software balances traffic across the member links within an aggregated SONET/SDH bundle based on the Layer 3 information carried in the packet. This implementation uses the same load balancing algorithm used for per-packet load balancing.
SONET/SDH aggregation is proprietary to the JUNOS software and might not work with other software."
Correct - the router platforms you mention do not offer OC-1 interfaces and thus they don't allow one to aggregate OC-1 signals. They each offer OC-3 interfaces but one cannot aggregate them together (AFAIK).
As Tom correctly mentioned, VCAT is commonly available and used on the CISCO ONS 15454 SONET/SDH platforms.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.