Optics and Optical Networking

Hi Everyone,We have just had BT Fibre to property installed and the ONT uses an RJ45 cable. On our previous broadband it has an RJ11 that plugs into the back of the 887va. We use the router for external remote access so I need to keep this in our set...

We have a stack made by C2960X-48FPD-L, C2960X-48FPS-L and C2960X-24PS-L. The first SW can have SFP+ but the others don't. In existing architecture the first one has a 1000BaseSX SFP maybe for compatible with the others. Can i put a 10GBaseSX SFP at ...

Cisco SFP-10G-T-S Compatible 10GBASE-T SFP+ Copper RJ-45 30m Transceiver Module   I cannot find Cisco part # anywhere 

Hi All,   We are using  cisco ONS 15454. So here in the fiber cable which is connected,  how can I find the DBloss.    Regards,Sinjish.K 

Hello I have two cisco 2960 and uplink cable between switches in multimode fibre cable with 10 meters of distance. Now i want to buy a SFP for this switches. Currently i have Cisco SFP-10G-SR which supports 10G speed. What i know is Cisco 2960 suppor...

Hi Team, Kindly help me to know the compatibility between C9200L-24T-4X-A & SFP-10G-T-X=. Please confirm.  

Hi I am new developer and was trying to automate scenarios for 5G network Function Currently I am trying to automate the process to add a new profile to 5G NF SMF where it reads the input from the file  I need to know how do i create a new container ...

Cisco Optics-to-Device Compatibility Matrix says that GLC-SX-MMD is compatible with C8200-1N-4T from IOS XE 17.5.1 https://tmgmatrix.cisco.com/?tpid=201&npid=4582 But in my case it is not. C8200#sh verCisco IOS XE Software, Version 17.06.03a C8200#sh...

Hola Comunidad Cisco. Alguien sabrá por qué un C9200L podría no detectar las interfaces SFP.Coloco los mismos SFP (GLC_LH-SMD) en un 2960 y los ve inmediatamente. Atento a sus feedback, muchas gracias.

I am looking for functioning GPON/XGSPON SFP ONT sticks with MAC for Cisco routers. Unfortunately, Cisco itself does not offer such modules yet, and my attempts with third-party modules have not been very successful so far (despite "service unsupport...