Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

C2960-24TC-L + Singlemode fiber

Hello

I need to know if this architecture is compatible.

I put the diagram as an attachment.

Thanks !

Thibaud.

  • Optical Networking
1 ACCEPTED SOLUTION

Accepted Solutions

C2960-24TC-L + Singlemode fiber

Yes, the GLC-LH-SMD is compatible with your hardware:

Catalyst 2960 series

WS-C2960-24TC-L
WS-C2960G-24TC-L
WS-C2960-48TC-L

GLC-T (1000BASE-T)
GLC-SX-MM
GLC-LH-SM
GLC-ZX-SM
GLC-ZX-SMD
GLC-BX-D
GLC-BX-U
CWDM SFP
GLC-SX-MMD
GLC-LH-SMD

12.2(25)FX

Optical Transceiver module compatibility information can ba found at the following Cisco url:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

Some of the optical transceiver model numbers shown in the above table are being discountinued, per the following Cisco presentation:

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/presentation_c97-683584.pdf

Hope this helps!

4 REPLIES

C2960-24TC-L + Singlemode fiber

To run the proposed link over single mode fiber, you will need to use the GLC-LH-SMD optical transceiver in the 2960s and single mode fiber jumpers (LC to ST connectors), between the module and the patch panels.

The GLC-SX-MM optical transceiver is for operation over multimode fiber. 

New Member

C2960-24TC-L + Singlemode fiber

thank you for your response Tom

GLC-LH-SMD is compatible with the C2960-24TC-L ?

C2960-24TC-L + Singlemode fiber

Yes, the GLC-LH-SMD is compatible with your hardware:

Catalyst 2960 series

WS-C2960-24TC-L
WS-C2960G-24TC-L
WS-C2960-48TC-L

GLC-T (1000BASE-T)
GLC-SX-MM
GLC-LH-SM
GLC-ZX-SM
GLC-ZX-SMD
GLC-BX-D
GLC-BX-U
CWDM SFP
GLC-SX-MMD
GLC-LH-SMD

12.2(25)FX

Optical Transceiver module compatibility information can ba found at the following Cisco url:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

Some of the optical transceiver model numbers shown in the above table are being discountinued, per the following Cisco presentation:

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/presentation_c97-683584.pdf

Hope this helps!

New Member

C2960-24TC-L + Singlemode fiber

great !!

Thank you very much for the information. Now I know what modules I need.

What is strange is that I tested rapidly the architecture of my schema and it seems to work. At least, a ping works.

This is not necessarily the most efficient or the most relevant but it seems to work.

510
Views
0
Helpful
4
Replies
This widget could not be displayed.