Coming off of the ONS 15454 to a 7206 with a channelized ds3 card (PA-MC-T3), does the ONS card have to be a DS3XM card or can I use a standard DS3 card? I need the channelization to split off the T1's. If you need more info or if I didn't explain it right, please let me know.
It all depends how your ds3 was ordered, if you are trying to add customers to this router your ds3 should have been ordered with MI3 framing, The ONS is just passing the DS3 to a your router, but preferably you should have a DSX 3 card in between your router and the ONS for troubleshooting purposes
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...