10-16-2014 04:21 AM
Good day,
Is it possible to connect X2-10GB-LR to 10GBASE-SR with 4-5 metre patch cord?
Cisco X2-10GB-LR
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
Сisco X2 | |||||
Cisco X2-10GB-LRM | |||||
The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.
Cisco SFP+ | Wavelength (nm) | Cable Type | Core Size (Microns) | Modal Bandwidth (MHz*km)*** | Cable Distance* |
Cisco SFP-10G-SR | 850 | MMF | 62.5 62.5 50.0 50.0 50.0 50.0 | 160 (FDDI) 200 (OM1) 400 500 (OM2) 2000 (OM3) 4700 (OM4) | 26m 33m 66m 82m 300m 400m |
Solved! Go to Solution.
10-16-2014 05:00 AM
Not possible. You need to use modules with the same wavelengths, i. e. SR to SR or LR to LR.
10-16-2014 05:00 AM
Not possible. You need to use modules with the same wavelengths, i. e. SR to SR or LR to LR.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: