02-20-2009 07:21 AM
I want to buy ASA5550 and CSS11503 to primary DataCenter and connected over CWDM to second DataCenter where there will be the same devices but I don't know if I insert directly CWDM-SFP-1470= to ASA5550 it will be work. The same concern CSS11503??
I saw that ASA5550 and CSS11503 support only standard SFP (LH/LX SX). There is nothing about SFP CWDM. Maybe someone has got experience with CWDM and both devices(ASA5550 and CSS11503).
Solved! Go to Solution.
02-20-2009 07:40 AM
Like you indicate, the CWDM Compatibility Matrix Sheet does not indicate current compatibility between ASA and CSS products and CWDM optics modules.
One option would be to use a set of transponders to convert your grey optics to a colored optics;
Cisco 2-Channel SFP WDM Transponder
02-20-2009 07:40 AM
Like you indicate, the CWDM Compatibility Matrix Sheet does not indicate current compatibility between ASA and CSS products and CWDM optics modules.
One option would be to use a set of transponders to convert your grey optics to a colored optics;
Cisco 2-Channel SFP WDM Transponder
02-20-2009 08:30 AM
hi,
Do you already have CWDM? If yes then as mentioned in other post can use a transponder
Otherwise if distance permits and you have extra fiber pair, you can think of connecting directly.
02-20-2009 10:39 AM
Distance between both DataCenter is about 15000meters and even I have 2 links from FiberChannel switch to CWDM-MUX8A.I haven't got system CWDM yet. I must buy this.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: