On a DPT/RRP ring do all routers around the ring see each other as being an identical distance apart?
If two routers on a DPT/RPR ring advertise the same IP networks to the other routers around the ring by an IGP, would these other routers see the IGP distance as equal and if configured, load balance traffic destined to these routers??
Haven't been able to find any confirmation of this on the Cisco website and I was hoping someone out there has done or seen this in action...
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...