Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Fiber link between 2 buildings

Hi Guys,

I am faced with the challenge of connecting 2 switches located at different building next to each other. I choose to have on one end, the core switch WS-C3750G-24PS-S with transceiver module GLC-LH-SM plugged in, single mode fiber cable running in between and the other end a WS-C2960-24TC-L with GLC-LH-SM module.

WS-C3750G-24PS-S --- GLC-LH-SM ---single mode fiber cable --- GLC-LH-SM --- WS-C2960-24TC-L

The distance between both building should be no more than 1 km. Did I size the setup correctly to ensure both side can see each other on the network?Any thing I should take note as I am implementing this for the first time.Please advise, thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Fiber link between 2 buildings

Yes your setup is correct.

Only thing to take care is label your patching cable which is transmitting and which is receiving. so that trans of one is connected to receive of other.

In case still have any doubt let us know

5 REPLIES
Silver

Re: Fiber link between 2 buildings

Yes your setup is correct.

Only thing to take care is label your patching cable which is transmitting and which is receiving. so that trans of one is connected to receive of other.

In case still have any doubt let us know

New Member

Re: Fiber link between 2 buildings

Thanks for your reply.

Re: Fiber link between 2 buildings

Also, keeping your optical connections clean is very important. Get yourself a connector cleaning tool or kit, similar to the below items. They are easy to use and may save you some headaches.

Fiber Optics Cleaning Kit

http://www.flukenetworks.com/fnet/en-us/products/Fiber+Cleaning+Kit/Overview.htm

Fiber Optic Supplies Distributor (FIS)

http://www.fiberinstrumentsales.com/fiberopticconsumables/fiberopticconnectorcleaner/index.html

NTT-AT Optipop Reel Cleaners

http://www.usconec.com/pages/products/cleaner/cassette/cassettefrm.html

New Member

Re: Fiber link between 2 buildings

Thank you.

New Member

Re: Fiber link between 2 buildings

yes u can do this . but noted the the tans and receive patch code.

404
Views
0
Helpful
5
Replies