Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Hardware problem ONS 15305

Hi,

I have a hardware problem with an ONS 15305.Examining its boot log I've noticed the following lines at the end of the log:

>>>> SNMP MIB variables initialisation starting.

>>> SNMP MIB variables initialisation finished.

07:45:35 : DCN: UNUSED Slot[1] Port[1] Chan[DCC-R] DOWN

07:45:35 : DCN: UNUSED Slot[1] Port[1] Chan[DCC-M] DOWN

07:45:35 : DCN: UNUSED Slot[1] Port[2] Chan[DCC-R] DOWN

07:45:35 : DCN: UNUSED Slot[1] Port[2] Chan[DCC-M] DOWN

07:45:35 : DCN: UNUSED Slot[1] Port[3] Chan[DCC-R] DOWN

07:45:35 : DCN: UNUSED Slot[1] Port[3] Chan[DCC-M] DOWN

07:45:35 : DCN: UNUSED Slot[1] Port[4] Chan[DCC-R] DOWN

07:45:35 : DCN: UNUSED Slot[1] Port[4] Chan[DCC-M] DOWN

07:45:36 : DCN: UNUSED Slot[1] Port[5] Chan[DCC-R] DOWN

07:45:36 : DCN: UNUSED Slot[1] Port[5] Chan[DCC-M] DOWN

07:45:36 : DCN: UNUSED Slot[1] Port[6] Chan[DCC-R] DOWN

07:45:36 : DCN: UNUSED Slot[1] Port[6] Chan[DCC-M] DOWN

07:45:36 : DCN: UNUSED Slot[1] Port[7] Chan[DCC-R] DOWN

07:45:36 : DCN: UNUSED Slot[1] Port[7] Chan[DCC-M] DOWN

07:45:36 : DCN: UNUSED Slot[1] Port[8] Chan[DCC-R] DOWN

07:45:36 : DCN: UNUSED Slot[1] Port[8] Chan[DCC-M] DOWN

I've changed the ethernet and fiber interfaces on another chassis and I had almost the same log without the upper lines.I would like to know the meaning of those lines:does they mean there is a hardare problem with the Slot 1 port of the device?I will attach the 2 log for comparison,one with a good chassis and one with the fault(I think) chassis.Thank you for your time!

152
Views
0
Helpful
0
Replies
CreatePlease to create content