Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Hi-TxPower

I use OTU2-XP with ONS-XC-10G-55,7 and 56,5. When I provisioned it for STM64, everything was OK but when I changed it to 10GE, alarm HI-TxPower has appeared and I do not know how to fix it because all values are within the thresholds.

Thanks

1 REPLY
Silver

Re: Hi-TxPower

Default Severity: Minor (MN), Non-Service-Affecting (NSA)

The Equipment High Transmit Power alarm is an indicator on the TXP_MR_E, TXP_MR_10G, TXP_MR_2.5G, TXPP_MR_2.5G, MXP_2.5G_10G, or OC192-XFP card transmitted optical signal power. HI-TXPOWER occurs when the measured optical power of the transmitted signal exceeds the threshold.

Clear the HI-TXPOWER Alarm click the below link.

http://www.cisco.com/univercd/cc/td/doc/product/ong/15400/r80docs/d80tbls/d80alts.htm#wp4583285

171
Views
0
Helpful
1
Replies