cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
14371
Views
5
Helpful
6
Replies

How can I see the optical power in a gigabitethernet interface of the next module WS-X4612-SFP-E in WS-4507R+E?

hhmaldon1
Level 1
Level 1

Hi,

I need your help to know what command Can I use to display the power optics from  a interface on a switch WS-4507R+E

 

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 15.0(2)SG6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 31-Oct-12 14:49 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x12CFB978

ROM: 12.2(44r)SG10
Darkside Revision 4, Nexu Revision 12, Fortooine Revision 1.32
Uptime for this control processor is 1 year, 25 weeks, 2 days, 19 hours, 50 minutes
System returned to ROM by power-on
System restarted at 18:25:28 CDT Tue Apr 2 2013
System image file is "bootflash:cat4500e-ipbasek9-mz.150-2.SG6.bin"

And this is the module type:

show module 5
Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
 5    12  1000BaseX (SFP)                        WS-X4612-SFP-E     JAE1701091K 

 

NAME: "GigabitEthernet5/2", DESCR: "1000BaseSX"
PID: GLC-SX-MMD        , VID: V01  , SN: FNS164809BM

 

Thank you for your help.

 

1 Accepted Solution

Accepted Solutions

Try "sh interface trans details".

View solution in original post

6 Replies 6

Leo Laohoo
Hall of Fame
Hall of Fame

The command is:  sh interface Gi5/2 transceiver properties

Hi,

Leo:

Iam sorry,  but i tried to give this command and it does not accepted.

 

Try "sh interface trans details".

i TRIED with this command.

 

Thank  for your help.

 

Regards

Did you find out how to do this?

If you look at table 2 in the link it shows the DOM support on 4500 series. Check the SFP you are using. I tried GLC-SX-MMD and I am also unable to see any details when using show int g0/1 transceiver detail.

 

Table 2 DOM Support on the Catalyst 4500 Series Switch applies to these module

 

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_27991-01.html#pgfId-2674444

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: