How can I see the optical power in a gigabitethernet interface of the next module WS-X4612-SFP-E in WS-4507R+E?
I need your help to know what command Can I use to display the power optics from a interface on a switch WS-4507R+E
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 15.0(2)SG6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2012 by Cisco Systems, Inc. Compiled Wed 31-Oct-12 14:49 by prod_rel_team Image text-base: 0x10000000, data-base: 0x12CFB978
ROM: 12.2(44r)SG10 Darkside Revision 4, Nexu Revision 12, Fortooine Revision 1.32 Uptime for this control processor is 1 year, 25 weeks, 2 days, 19 hours, 50 minutes System returned to ROM by power-on System restarted at 18:25:28 CDT Tue Apr 2 2013 System image file is "bootflash:cat4500e-ipbasek9-mz.150-2.SG6.bin"
And this is the module type:
show module 5 Mod Ports Card Type Model Serial No. ---+-----+--------------------------------------+------------------+----------- 5 12 1000BaseX (SFP) WS-X4612-SFP-E JAE1701091K
If you look at table 2 in the link it shows the DOM support on 4500 series. Check the SFP you are using. I tried GLC-SX-MMD and I am also unable to see any details when using show int g0/1 transceiver detail.
Table 2 DOM Support on the Catalyst 4500 Series Switch applies to these module
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...