I have 100 Mbps Fiber Optic Broadband Internet Connection using RJ45. At present using Dlink normal Router. I plan to change ISR
I have 100 Mbps Fiber Optic Broadband Internet Connection using RJ45.No Static IP or leased Line . At present using Dlink normal Router. I plan to change Cisco Router. which model is full my requirement. what is ISR Router ( Integrated Services Router. ) Dear Guys, give me your valuable suggestions and support.
If you are looking to get an integrated service router, I would suggest you take a look at the datasheets at Cisco sites. If I am quoting out a ISR I always take into considering features that will be used on the router.
For instance if you want to use the router as a voicegateway you need a UC license, If you want to do IP SLA you need a data license, the list goes on and on. Without know exactly what you plan on doing with the router it is hard to say.
Also since you say you are replacing out a Dlink router, is the Dlink router providing you 802.11? If so you will need hwic modules for the router.
I would suggest you try to talk with a Cisco AM or a Cisco partner to better address your needs and to ensure you get the correct features licensed.
Thank you very much for your reply . I am using Dlink Router with 802.11. but i dont want to use the same in Cisco ISR Router. i am looking for Cisco Router ISR to replace the old one. I dont want to use any Voice gateway models and IP and VPN SLA levels of services. thanks in advance.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...