Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LMP between M6 and ASR9K

Hi All,

I am trying to build a LMP control channel between M6 chassis and ASR9K but it is not successful. below is my setup details

M6(R9.8) EMS (10.10.1.17) port connects to a switch, then ASR9K (4.2.1) Mgmt0 (10.10.1.27) also connects to same switch same VLAN and CTC PC is 10.10.1.100 connected to same VLAN.

I followed the procedures given in below link, but I don't get success while creating the LMP control channel. when I checked in the router I could see two ssh sessions from CTC PC but not from M6 Chassis.

http://www.cisco.com/en/US/docs/optical/15000r9_8/dwdm/configuration/guide/454d98_turnupnetwork.html#wp595598

Can anyone shed some light on this please ?

RGds

Harin

576
Views
0
Helpful
0
Replies