I'm doing a network drawing for a company that is using the LS1010 ATM switches. Does anyone know if I can still get stencils for that product? I checked the web site quickly but didn't see anything. I know these are pretty old so they may not be available. Any input would be greatly appreciated. Thanks!
That is good enough for me. I'm in the middle of a WAN re-design and I need to draw up an existing environment that is using some 1010's so the chassis is good enough. Could you email them to me at firstname.lastname@example.org? Thanks in advance!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...