We have a large network with a mixture of M6 and M12 Network Elements geographically dispersed from one another. What is the best recommendation for managing this via CTC? Most specifically do the nodes need to be in the same broadcast domain, or can we connect each node to a router in the different PoPs and as long as we have IP connectivity we are okay?
We have tried a few different approaches, and none are really that fast. We have discussed with support a few times and gotten a few different answers. What does the support community generally do for management of the NEs?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...