If i look at Ordering Information in table 6 there is 4 different models. Two of them are OC-192 and others STM-64. In our case we want to use the OC-192 XFP-based multiple-reach optics card, 1 ckt for SONET systems (15454-10G-XR) with a ONS 15454E SDH (Cisco ONS 15454 SDH/ETSI System) using SA-ETSI assembly.
Is it possible or there is an incompatibility problem ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...