Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

OC768 vs OC768c

I'm confused with the product of Cisco CRS-1 Single-Port OC-768c/STM-256c POS Interface Module.

The problem is that what this module uses: OC768 or OC768c. It seems to support OC768c according to its datasheet, but the order information is Cisco CRS-1 1-Port OC-768/STM-256 POS/DPT Interface Module, where it is OC-768 without 'c'.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: OC768 vs OC768c

Cisco CRS-1 1-Port OC-768/STM-256 POS/DPT will be using OC 768c as after Oc 768 it is mentioned POS/DPT. POS/DPT cards are OC-XXXc cards.

This is part number for (CHOC48/DS3-SR-SC )

Cisco 1-Port Channelized OC-48 line card where they donot mention POS/DPT after the card means this is OC-48 card using)OC48 not OC48c.

Hope ur confusion is over now.

1 REPLY
Silver

Re: OC768 vs OC768c

Cisco CRS-1 1-Port OC-768/STM-256 POS/DPT will be using OC 768c as after Oc 768 it is mentioned POS/DPT. POS/DPT cards are OC-XXXc cards.

This is part number for (CHOC48/DS3-SR-SC )

Cisco 1-Port Channelized OC-48 line card where they donot mention POS/DPT after the card means this is OC-48 card using)OC48 not OC48c.

Hope ur confusion is over now.

184
Views
0
Helpful
1
Replies