You're questions a little vague, could you be more specific? Do you want to now what cards to order, or how to configure the box's??? It sounds like you are planning to put GE, oc-3, ds3 etc... on an oc-12 ring, if thats the case an oc-12 won't have enough bandwidth for you. Also, how long are the fiber spans and what's the loss on them??? The more info you can give the better.
2 XC-VT or XC10G (the 10g card is a 10g x-connect, the vt is 2.5G)
For ds-1 I'd get the ds1-14, each card gives you 14 T1's
For DS3, you need the ds3-12 card, each card supports 12 ds-3s
For the oc-12 card I'd go with the oc12 LR 1550 card (it's hard to say which one without knowing the fiber specs and distance)
for oc-3 there is a 4 and an 8 port card, oc3 IR 4 and IR 8
For the GE you have 2 options the G1K-4 and the ML1000-2 The G series card is 'dumb', 'light in, light out' other node, the ML series card runs IOS and you can do a lot with it. I'd read up on each card and make the choice that is right for you.
These are just my recommendations, it's hard to give you specifics without knowing more. You should also take a look at this:
I just saw your's & Dave's discussion. My question to you is pretty much similar to the previous question but regarding VoIP Deployment on ONS 15454. My network will be based on STS-3/OC-3, OC48 & OC192 and I am looking for the:
"Recommended Solution for the VoIP deployment.
I request you to let me know the Current Recommended Solution with the latest devices (cards, software releases) Only for the VoIP deployment on Cisco ONS 15454 SONET, this includes:
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.