Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ONS 15454 MSPP Recommendation

Currently Being Moderated

ONS 15454 Recommendations

Hello Guys,

Just looking for some recommendations / best practices from experienced ONS 15454 engineers for the following questions.

Scenario:

There are 2 sites located 130 km away from one to the other and we want to provide a wan connectivity via ONS 15454.

Questions:

1. The ethernet / DWDM modules preferred

2. The typical wave length will be used -- 1550 or 1310?

3. What are the speeds supported on the modules?

4. What should be the recommended max losses / power budget for 130 km for Cisco ONS to work properly?

5. Any specific recommendations.

Thanks & Regards

Jay

  • Optical Networking
1 REPLY
Cisco Employee

ONS 15454 MSPP Recommendation

1. The ethernet / DWDM modules preferred

GE_XPE, 10GE_XPE,  OTU2_XP, ML cards,

CE-Series 10-Port Multirate Ethernet Card, 10DME, MXP, 10x10 there are lot of cards depends on your requirement, line rates coming from WAN device, types of module present on WAN side.

2. The typical wave length will be used -- 1550 or 1310?

depends if you looking for a SDH/SONET solution, will say 1550, if DWDM than it will be composite siganal with MUX/DMUX.

3. What are the speeds supported on the modules?

10mbps, 100Mbps, 1000Mbps, 1Gig, 10Gig, 40gig and 100Gig depends on your requirement :-)

4. What should be the recommended max losses / power budget for 130 km for Cisco ONS to work properly?

around 35dB to 39dB of span loss, looks you need amplification.

5. Any specific recommendations.

we need to discuss your requiremnets, there are lot of sloution available.

538
Views
0
Helpful
1
Replies