Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PA-POS STM1 problem

Dear Gurus,

How come my interface is up/up but i cant even ping my own ip address? Is there a special commands for POS interfaces?

Im using 7206vxr for mpls network.

Thanks.

4 REPLIES
Gold

Re: PA-POS STM1 problem

more than likely a routing configuration issue.

up and up would refer to seeing signalling from the far end

and agreeing on the line protocol.

Hall of Fame Super Gold

Re: PA-POS STM1 problem

more than likely a routing  configuration issue.

Not likely at at all. There is no routing in ping local interface (direct delivery)

up and up would refer to seeing signalling  from the far end

Incorrect, there is no signalling on serial interface.

and agreeing on the line protocol.

What that would mean exactly?

Gold

Re: PA-POS STM1 problem

1. wonder if it could be related to a vrf definition

2. pos interface config subcommands generally need to be identical for the interface to show up.

3. line protocol...hdlc..ppp pos...

Re: PA-POS STM1 problem

365
Views
0
Helpful
4
Replies
CreatePlease to create content