Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

problem about ons15540 dwdm

I have two 15540,link with p-to-p topology,it now have problem,following is the log,could anybody know how to solve the problem.

18:13:33: %LCMDC-3-MIB_FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync ASSERT MAJOR Wave3/0

18:13:33: %LCMDC-3-FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync; Slot 3 Subcard 0 Port 0

18:13:35: %LINK-3-UPDOWN: Interface Wave3/0, changed state to down

18:13:35: %LINK-3-UPDOWN: Interface Wavepatch3/0/0, changed state to down

18:13:35: %LINK-3-UPDOWN: Interface Wavepatch3/0/1, changed state to down

18:13:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wave3/0, changed state to down

18:13:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/0/0, changed state to down

18:13:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/0/1, changed state to down

18:13:44: %LCMDC-3-MIB_FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync CLEAR MAJOR Wave3/0

18:13:46: %LINK-3-UPDOWN: Interface Wave3/0, changed state to up

18:13:46: %LINK-3-UPDOWN: Interface Wavepatch3/0/0, changed state to up

18:13:46: %APS-6-ENAUTFOVR: Enable Auto-Failover On Wavepatch3/0/0

18:13:46: %LINK-3-UPDOWN: Interface Wavepatch3/0/1, changed state to up

18:13:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wave3/0, changed state to up

18:13:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/0/0, changed state to up

18:13:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/0/1, changed state to up

18:13:48: %LCMDC-3-FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync; Slot 3 Subcard 1 Port 0

18:13:49: %APS-6-ENAUTFOVR: Enable Auto-Failover On Wavepatch3/0/0

18:13:50: %LINK-3-UPDOWN: Interface Wave3/1, changed state to down

18:13:50: %LINK-3-UPDOWN: Interface Wavepatch3/1/0, changed state to down

18:13:50: %LINK-3-UPDOWN: Interface Wavepatch3/1/1, changed state to down

18:13:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wave3/1, changed state to down

18:13:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/1/0, changed state to down

18:13:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/1/1, changed state to down

18:14:02: %LCMDC-3-MIB_FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync CLEAR MAJOR Wave3/1

18:14:04: %LINK-3-UPDOWN: Interface Wave3/1, changed state to up

18:14:04: %LINK-3-UPDOWN: Interface Wavepatch3/1/0, changed state to up

18:14:04: %APS-6-ENAUTFOVR: Enable Auto-Failover On Wavepatch3/1/0

18:14:04: %APS-6-CHNLACTIVE: Group Wavepatch3/1/0 - PROTECTION channel is now ACTIVE

18:14:04: %LINK-3-UPDOWN: Interface Wavepatch3/1/1, changed state to up

18:14:05: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wave3/1, changed state to up

18:14:05: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/1/0, changed state to up

18:14:05: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/1/1, changed state to up

18:14:07: %APS-6-ENAUTFOVR: Enable Auto-Failover On Wavepatch3/1/0

18:14:46: %LCMDC-3-MIB_FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync ASSERT MAJOR Wave3/0

18:14:46: %LCMDC-3-FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync; Slot 3 Subcard 0 Port 0

18:14:48: %LINK-3-UPDOWN: Interface Wave3/0, changed state to down

18:14:48: %LINK-3-UPDOWN: Interface Wavepatch3/0/0, changed state to down

18:14:48: %LINK-3-UPDOWN: Interface Wavepatch3/0/1, changed state to down

18:14:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wave3/0, changed state to down

18:14:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/0/0, changed state to down

18:14:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wavepatch3/0/1, changed state to down

18:14:56: %LCMDC-3-MIB_FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync ASSERT MAJOR Wave3/1

18:14:56: %LCMDC-3-FH_ELOSY_ALM: Egress FC/ESCON Loss of Sync; Slot 3 Subcard 1 Port 0

3 REPLIES
Bronze

Re: problem about ons15540 dwdm

CPU minor alarm isolated to SBY-CPU running a different code than the ACT CPU. Copy the current code 12.2 SV2 to the SBY-CPU bootflash. Reloaded peer, alarm now clear.

New Member

Re: problem about ons15540 dwdm

i have check the ios on standby engine, the active and standby have the same ios,so it's not the real problem

New Member

Re: problem about ons15540 dwdm

I'll suggest to follow troubleshooting indications:

http://www.cisco.com/en/US/customer/products/hw/optical/ps2011/prod_error_message09186a008060b7ac.html#wp1011394

It may be a problem on the cable connecting tha card in slot 3 to OADM (or to cross-connect drawer). I've seen that both transponders in slot 3/0 and 3/1 presents problems on both wavepatches, so it seems to be a problem common to some/all transponders on that slot. Try to clean all connections and verify otpical levels.

Stefano

195
Views
0
Helpful
3
Replies
CreatePlease login to create content