Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Prolabs GLC-LX/LH-SM-C compatible with 3750 ?

Hi I have a catalyst 3750, and a gbic prolabs.

Currently i haven't connexion on this gbic.

To solve my problem, i want to kown if the gbic works (or is compatible), how can i kown it ?

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Prolabs GLC-LX/LH-SM-C compatible with 3750 ?

Hi

If you are installing non-cisco GBIC then you can see the error logs in your logs if you have already enabled logging in your switch.

you need to configure it using hidden command

"service unsupported-transceiver"

Stack1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Stack1(config)#service unsupported-transceiver

Warning: When Cisco determines that a fault or defect can be traced to

the use of third-party transceivers installed by a customer or reseller,

then, at Cisco's discretion, Cisco may withhold support under warranty or

a Cisco support program. In the course of providing support for a Cisco

networking product Cisco may require that the end user install Cisco

transceivers if Cisco determines that removing third-party parts will

assist Cisco in diagnosing the cause of a support issue

regds

2 REPLIES

Re: Prolabs GLC-LX/LH-SM-C compatible with 3750 ?

Hi

If you are installing non-cisco GBIC then you can see the error logs in your logs if you have already enabled logging in your switch.

you need to configure it using hidden command

"service unsupported-transceiver"

Stack1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Stack1(config)#service unsupported-transceiver

Warning: When Cisco determines that a fault or defect can be traced to

the use of third-party transceivers installed by a customer or reseller,

then, at Cisco's discretion, Cisco may withhold support under warranty or

a Cisco support program. In the course of providing support for a Cisco

networking product Cisco may require that the end user install Cisco

transceivers if Cisco determines that removing third-party parts will

assist Cisco in diagnosing the cause of a support issue

regds

Community Member

Re: Prolabs GLC-LX/LH-SM-C compatible with 3750 ?

YESSSSSSS !

Thank you very much, 2 months on this problem !!!!

Your solution is perfect !

741
Views
0
Helpful
2
Replies
CreatePlease to create content