Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

suggest a dvice

hi.

i have 3 Lan in city A , City B , City C (each city use and Cisco switch 2960)

i have 2 core fiber optic (from City A to City B) and 2 core fiber optic (from City B to City C)

i want use fiber optic to ethernet converter for connecting city A to B and B to C.

note that city B need 2 fiber optic ports. (A to B) and (B to c).

(i want to integrate Lan A,LanB,LanC)

whitch device you recommend? distance from A to B is: 50 KM , and B to C is 80 KM.

  • Optical Networking
2 REPLIES
Silver

Re: suggest a dvice

DO you have copper uplink or Optical uplink in your switch? If OPtical uplink them you can take GLC-ZX-SM= .I think can go till 80Km.

From your post look like you have copper and you can use a media converter which can go 50KM & 80Km.

Or you can use a SDH/SONET box with ethernet capability since your link is linear so i dont think you will get any advantage of SDH/SONET ring protection.

Re: suggest a dvice

If you only have copper uplinks, then purchasing two pairs of the 80km media converters should do the trick (example at link below:

http://www.omnitron-systems.com/downloads/datasheets/4370DS-C.pdf

Good luck!

174
Views
0
Helpful
2
Replies