Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Telnet 15454

Is there anyway to change the IP adress of a 15454 via telnet?

1 REPLY
New Member

Re: Telnet 15454

Following is a link to the TL1 command descriptions for 4.0

http://www.cisco.com/en/US/partner/products/hw/optical/ps2006/products_command_reference_chapter09186a0080154e98.html#149008

Once a telnet connection has been established, use the following command to establish a TL1 session with the 15454 : 3.4.1 ACT-USER: Activate User

Use the following command to change the IP address/mask/gateway : 3.4.42 ED-NE-GEN: Edit Network Element General

The IP address does not take effect till the 454 has been rebooted. Use the following command to restart the box : 3.4.76 INIT-SYS: Initialize System .

Warning - Initializing the system will cause traffic disruption and the node will be unavailable for a few minutes.

If you have a different code installed,other than 4.0, search Cisco.com for the correct TL1 command usage for your version.

Let me know if you have questions.

Praveen.

570
Views
0
Helpful
1
Replies