Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-X6704-10GE -10GBASE-SR

Hi All,

We have a 10G DWDM circuit terminated on 7600-sup720-3bxl (WS-X6704-10GE,10GBASE-SR) interface and we get below optical receive power measured on the router

sh interfaces tenGigabitEthernet 9/2 transceiver (o/p modified for simplicity)

Optical

Rx Power

Port (dBm)

------- --------

Te9/2 -2.6

We are trying to understand,what would be the cisco recommended optical rx power levels. Any help on this would be really appreciated.

Thanks

Regards

Anantha Subramanian Natarajan

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: WS-X6704-10GE -10GBASE-SR

Per the following data sheet, the XENPAK-10GB-SR module has a receiver range of -1.0 (max) to -9.9 (min). Your -2.6 dBm input would fall within the range.

What transmit equipment (specs) is connected to this receiver port? Might you have a optical power meter handy to verify the router's reading (I can dream)?

<http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5138/product_data_sheet09186a008007cd00_ps5455_Products_Data_Sheet.html>

Hall of Fame Super Gold

Re: WS-X6704-10GE -10GBASE-SR

You want the Data Sheet for Cisco 10GBASE XENPAK Modules? Here's the link:

www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5138/product_data_sheet09186a008007cd00_ps5455_Products_Data_Sheet.html

Does this help?

7 REPLIES
Hall of Fame Super Gold

Re: WS-X6704-10GE -10GBASE-SR

Have you checked the Cisco 10GBase DWDM XENPAK Modules Data Sheet?

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/product_data_sheet0900aecd801f9333.html

Hope this helps.

New Member

Re: WS-X6704-10GE -10GBASE-SR

Hi leolaohoo,

Thanks for the reply. We using a non-colured XENPAK and no wavelength mapping upto the router. Do you have a link where there is a data sheet for normal xenpak terminating 10gig interface on 10Gbase-SR interface type.

Thanks once again

Regards

Anantha Subramanian Natarajan

Hall of Fame Super Gold

Re: WS-X6704-10GE -10GBASE-SR

You want the Data Sheet for Cisco 10GBASE XENPAK Modules? Here's the link:

www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5138/product_data_sheet09186a008007cd00_ps5455_Products_Data_Sheet.html

Does this help?

New Member

Re: WS-X6704-10GE -10GBASE-SR

Hi Leolaohoo,

Yes and thank you very much

Regards

Anantha Subramanian Natarajan

Hall of Fame Super Gold

Re: WS-X6704-10GE -10GBASE-SR

Thanks for the rating, Anantha Subramanian Natarajan.

New Member

Re: WS-X6704-10GE -10GBASE-SR

No problem and thanks for the help

Re: WS-X6704-10GE -10GBASE-SR

Per the following data sheet, the XENPAK-10GB-SR module has a receiver range of -1.0 (max) to -9.9 (min). Your -2.6 dBm input would fall within the range.

What transmit equipment (specs) is connected to this receiver port? Might you have a optical power meter handy to verify the router's reading (I can dream)?

<http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5138/product_data_sheet09186a008007cd00_ps5455_Products_Data_Sheet.html>

626
Views
3
Helpful
7
Replies
CreatePlease to create content