Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

XENPAK-10G-LR does not switch off the laser

Hi.

We have a problem with the XENPAK-10G-LR that doesn't switch off the lasser in shutdown state, installed in 6509 with WS-X6704-10GE. The other side of the connection doesn't detects the shut.

I have checked that the X2-10G-LR disables the light, then the other side see the interface as down/down.

What is the cause?

Any method for disable the laser?

Regards.

Jose

5 REPLIES
New Member

Re: XENPAK-10G-LR does not switch off the laser

Jose,

We have a LR Xenpak that does the same thing. What was done to fix your problem?

Karl

Re: XENPAK-10G-LR does not switch off the laser

What IOS release are you running?

Have you checked the release notes to see if this issue has been identified?

New Member

Re: XENPAK-10G-LR does not switch off the laser

Hi.

We have had the same problem in 7600 (12.2SR) and 6500 (12.2SX).

I checked the realase notes and field notices, without results.

As a workaround, you can activate 'ethernet oam' to check that link is really up (if the other box supports it).

Regards.

Jose

Re: XENPAK-10G-LR does not switch off the laser

I guess you will have to report it as a bug so that it can be fixed in a future release.

New Member

Re: XENPAK-10G-LR does not switch off the laser

Thanx for your help.

1009
Views
0
Helpful
5
Replies
CreatePlease login to create content