Optics and Optical Networking

Hi,I'm a bit confused about the Mode conditioning patch cable should use with 10G transceivers, I found mainly two types available on Cisco site ( CAB-GELX-625 & CAB-MCP50-SC ) and my questoin is, based on what criteria shall I select one of them !! ...

Hi all.We have an ML-1000 card in one our 454 shelves that we can't log in to by either telnet or using CTC.When we attempt to log in, the screen displays the Username prompt three times and then gives us an EID-1023 Session has been terminated error...

Dear All,We are able to receive loop on Meter end to end, configuration required for ATM port on cisco rtr 7206 as STM1 link is terminated, link is optical.Rgds,Jitesh Chauhan

Is SONET a form of WAN technology? If not, please explain what WAN technology SONET can be used with.

Is anyone utilizing the UC 100Mb port on the OSCM module? I was wondering if anyone utilized it for CTC commiunications to remote sites?

I can't find regular oid for optical power and span loss. I need them for mrtg statistics.

Hey folks - I have a new install comming up that I am pretty sure I will need a ZX transceiver for. Ill be connecting a remote 3560-E to a 6513 using SFP connectors. I am pretty positive Ill be using a GLC-ZX-SM on both ends, but I am not sure how to...

Hello prosHave anybody tried GLC-BX-D/U= SFP modules with Cisco 7201 router? Does it work?

Hi All,I need to connect two 3750s with 4 SFPs between two sites that are 11km away from each other....My question is... Do I need to use Single Mode LX transceiver (but I see the maximum distance is 10km)... or do I need to use ZX transceiver? But d...

Hi,I've problem with software upgrade from 7.0.0 to 8.5.3, there is EID-2009 info that package is not valid.Have anyone any idea what's going on?Regards,