How can I get the CDR records to show up again after the CCM 3.3 upgrade?? The current flag is set to True but I don't have any current CDR records on the CallManager. I have stopped and restarted the service etc.
How can I get the CDR records to show up again after the CCM 3.3 upgrade?? The current flag is set to True but I don't have any current CDR records on the CallManager. I have stopped and restarted the service etc.
ok they wanted a Unified Messaging system. Now they don't want their emails read over the phone.How do i turn off this feature in unity 4.0.3 per subscriber?Thanks
I am trying to bring up a T1 PRI. I have the following config.isdn switch-type primary-dms100Controller t1 0/0linecode b8zsframing esfpri-group timeslot 1 - 24when i do a sh isdn status, layer 2 is showingTEI - ASSIGNED, then it changes to awaiting-e...
HiI would like to upgrade my flash memory 16 -> 32 Mo.I installed the new flash and i was using the Xmodem method to download the ios.After the process of sending has been finished i had a error message: Erasing flash memory failed and the download a...
Unity 4.03, Exchange 2000Server Name does not contain _Server Name is less than 15 charactersWhen accessing SA page I get the following error:Unrecognized error H=0x80040200 From: Global.asa - Initialize() Please see your system administrator for mor...
Is there any way, two users can talk at the same time from one IP Phone. Not from speaker phone. One user from headset and another from handset.
I am trying to figure out if it is possible to create a custom action for one of the 4 softkeys. We want to use one of those keys as a 1 touch dial to our campus public safety office. Does anyone have any experience with this? I checked in the IP Pho...
Need to get a paging solution for multiple buildings that are separated by at most a few miles and are interconnected w/ T1s to a central location.Is berbee the best solution? If not who is? And, lastly what are people's experiences with these produc...
Problem: user wants to auto dial a number that includes an extension, needs to add a "pause" symbol between the 10-digit dialed # and the 3 digit extension. Cannot find a way to do this either from fast dials, personal directory, or using the Outloo...
Unity 4.0(2)Cm 3.3Exchange 5.5 SP4Unable to see any users when I try to import users in from Exchange. Have confirmed able to resolve hostname and Full Qualified Domain Name between Exchange and Unity. Do I need to re run the mailstore wizard. If ...
Hi,I have installed Unity 4.1 on a New Server, And i want to import all my Subsribers with their Boxes,passwords and other settings from another Server running Unity 3.1(3).What is the best WAY to get this done.Maneesh
Jeff,I was posed a question about routing loops, I think it is different than any conversation talked about in this forum, but may be related to something in your audiotext doc (how unity prevents loops by going stright into the greeting). Is there ...
Can u change the call manager name without reloading the box????
I'm running CCM 3.2(2c). I'm running a custom phone directory on a 7960 with device load P00303020214.The (minor) problem is when I list 32 entries (the max per page for my directory), I see a 33rd line on the phone named Dial, with no number. It j...
case: callmanager 3.3 in combination with a 1760 gateway containing 3 VWIC-2BRI-NT/TE cards for termination of the provider isdn linesquestion: how can we make isdn modem calls from the inside network? which equipment should be used to connect these ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-22-2024 04:46 AM | ||
04-18-2024 07:46 AM | ||
04-15-2024 07:41 PM | ||
04-09-2024 02:09 PM | ||
02-25-2024 06:28 AM |